By TypeOptical Rotary Encoders Magnetic Rotary
Encoders
Hall Effect Sensors PotentiometersDraw Wire Solutions Inclinometers Electronic Modules SwiftComm Wireless
Encoder Interface
Sensor Support Products
By CertificationATEX and UL Hazardous
Area Certified
PL and SIL Functional
Safety
By ModelModel or SeriesEncoder Model
Comparison
Crossover LibraryCAD Drawings
Online Store Customer Resources Literature Requests About Sensor Technology Incremental vs Absolute Encoder Videos Glossary
 

Hall Effect Position Sensors - Non-Contacting Technology

Request for Quote

BEI Sensors Hall effect sensors meet customer needs for high performance, non-contact rotary position sensor solutions. This product line features a standard operational life of 35 million cycles while providing up to 6-turns with 2160 degrees of resolution and linearity of +/-0.5%. Capable of having redundant outputs, meeting up to IP69K sealing requirements and operating temperatures of 85º C , these rotary hall effect sensors are ideal for a wide variety of applications. Ideal applications include steering, pedal and throttle for off-highway equipment, dancer controls in web processing, flow control valves and elevator door opener operations.

Hall Effect Rotary Sensors

Select by body style and series below, or browse and configure the ideal Hall effect sensor based on individual parameters

Shafted hall effect sensorShafted Body Style

BEI Model 9360 Non-Contact Position Sensor Model 9360

Shafted 41mm rotary non-contacting sensor with 360° rotation and dual outputs. Option programmable versions available.

  • Shaft Size: 4.6mm
  • Resolution (Max): 12 Bit
  • Range of Motion: 15° to 360°
  • Standard Operating Temperature °C: -40 to +85
  • Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shock/Vibration
Sensors for wet environmentsSensors for dirty and dusty environmentsSensors for extended temperature environmentsSensor products high shock and vibration environmentsView Data Sheet »

Configure

 
BEI Sensors Model 9970 Non-Contact Position Sensor Model 9970

Shafted rotary Hall effect sensor that features a 50mm mounting hole spacing and a standard Amp, Superseal connector. The 9970 can use the full 360° travel range.

  • Shaft Size: 6mm
  • Resolution (Max): 12 Bits
  • Range of Motion: 30° to 360°
  • Standard Operating Temperature °C: -40 to +125
  • Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shock/Vibration
Sensors for wet environmentsSensors for dirty and dusty environmentsSensors for extended temperature environmentsSensor products high shock and vibration environmentsView Data Sheet »

Hollow through shaft hall effect sensorThrough Shaft Body Style

Non-contact position sensor BEI Model 8360 Model 8360

Through shaft 82mm non-contact position sensor featuring 360° rotation in a rugged, low-profile package.

  • Resolution (Max): 12x13 Bits
  • Range of Motion: 15° to 360°
  • Standard Operating Temperature °C: -30 to +85
  • Extreme Environments: Dirty/Dusty, Extended Temperature, High Shaft Load, High Shock/Vibration
Sensors for dirty and dusty environmentsSensors for extended temperature environmentsSensors and sensors for high shaft load environmentsSensor products high shock and vibration environments View Data Sheet »

Configure

Hollow blind shaft hall effect sensorBlind Shaft Body Style

BEI Hall Effect Position Sensor 9960 Series Model 9960

Blind shaft 37mm non-contacting sensor features 7 termination options and 24 active electrical angles.

  • Bore Size: 9.5mm blade
  • Resolution (Max): 12 Bit
  • Range of Motion: 15° to 360°
  • Standard Operating Temperature °C: -40 to +125
  • Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shock/Vibration
Sensors for wet environmentsSensors for dirty and dusty environmentsSensors for extended temperature environmentsSensor products high shock and vibration environmentsView Data Sheet »

Configure

 
Rotary Magnetic Position Sensor BEI Model ACW4-HCW4 Model HCW4

Blind shaft 50mm non-contacting position sensor with incremental output.

  • Bore Size: 6 to 10mm
  • Resolution (Max): 1024
  • Range of Motion: 0° to 360° continuous rotation
  • Standard Operating Temperature °C: -40 to +85
  • Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shaft Load, High Shock/Vibration
Sensors for wet environmentsSensors for dirty and dusty environmentsSensors for extended temperature environmentsSensors and sensors for high shaft load environmentsSensors products high shock and vibration environmentsView Data Sheet »
 
Rotary Magnetic Position Sensor BEI Model ACW4-HCW4 Model ACW4

Blind shaft 50mm non-contacting position sensor available with analog, CANopen, PWM, or SSI output.

  • Bore Size: 6 to 10mm
  • Resolution (Max): 12 Bits
  • Range of Motion: 15° to 360° PWM and analog 0° to 360° CANopen, SSI
  • Standard Operating Temperature °C: -40 to +85
  • Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shaft Load, High Shock/Vibration
Sensors for wet environmentsSensors for dirty and dusty environmentsSensors for extended temperature environmentsSensors and sensors for high shaft load environmentsSensor products high shock and vibration environmentsView Data Sheet » Analog (PDF -121KB)
CANopen (PDF -152KB)
PWM (PDF -100KB)
SSI (PDF -161KB)
 
BEI Model TCW4 Rotary Magnetic Position Sensor Model TCW4

Blind shaft 52mm non-contact position sensor available with analog, CANopen, PWM, or SSI output.

  • Shaft Size: 6 to 10mm
  • Resolution (Max): 12x13 Bit
  • Range of Motion: 8,192-turns, continuous rotation
  • Standard Operating Temperature °C: -20 to +85
  • Extreme Environments: Wet, Dirty/Dusty, Extended Temperature, High Shaft Load, High Shock/Vibration
Sensors for wet environmentsSensors for dirty and dusty environmentsSensors for extended temperature environmentsSensors and sensors for high shaft load environmentsSensor products high shock and vibration environments View Data Sheet » Analog (PDF -311KB)
CANopen (PDF -255KB)
PWM (PDF -241KB)
SSI (PDF -304KB)

back to top

Programmable Hall Device

Programmable Hall Device

The PHD from BEI Sensors provides an easy way to take control of customizing the output of BEI Hall effect sensors. This compact programming unit provides users with the ability to field program output functions that meet specific requirements. The PHD can be used for both analog and PWM outputs. Sensors can even be programmed directly in place using the actual assembly movement as the sensor input. This allows users to match the full range of the assembly precisely with the sensor output.

The included PHD software makes programming simple with a user-friendly screen where output routines can be created, stored and recalled for later use. The system also gives users the ability to lock the sensor to prevent accidental reprogramming. With the PHD, BEI Hall effect position sensors can even be programmed directly in place using the actual assembly movement as the sensor input. This allows users to match the full range of the assembly precisely with the sensor output.

Data Sheet

User Manual

PHD Software

back to top

Get Adobe Reader